VEMS Community Forum
VEMS => Configuration => Topic started by: james on April 24, 2018, 06:08:47 pm
-
HEllo all I'm after some advice please
I've wired up electric fan Control through p259 channel 7 pin 30
I can get it to work on the test outputs
But when I adjust the enable temperature to test it's function the fan kicks in and out for a second at a time continously
Any ideas?
-
HEllo all I'm after some advice please
I've wired up electric fan Control through p259 channel 7 pin 30
I can get it to work on the test outputs
But when I adjust the enable temperature to test it's function the fan kicks in and out for a second at a time continously
Any ideas?
maybe there is some channel conflict