VEMS Community Forum

VEMS => Configuration => Topic started by: jderimig on February 04, 2019, 09:28:03 pm

Title: Progressive Nitrous using TPS
Post by: jderimig on February 04, 2019, 09:28:03 pm
My first post and I apologize if this has been covered,  I used search.

I understand that boost control can be setup open loop to control the duty cycle of a solenoid mapped to rpm.  My question is can I use the tps factor also in this mode?  For example I would like the DC mapped to TPS also or alternatively to RMP.
Title: Re: Progressive Nitrous using TPS
Post by: MWfire on February 11, 2019, 10:48:33 am
Yes, you can use that for progressive nitrous if you have pwm solenoids. But you need to use 2-3 outputs in parallel, because current is big(30A).