VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: Seight-v8 on September 17, 2019, 07:19:57 pm

Title: correct map sensor?
Post by: Seight-v8 on September 17, 2019, 07:19:57 pm

hello all,

do I have the correct map sensor for my application?

currently I have 414kpa sensor......MPHX6400A,, so that's 20 to 400kpa range.....

As my engine is NA...would I be better with a smaller one, say the 115kpa?, from the webshop.

Just wondering if my current 414kpa sensor has enough resolution the engine needs at lower readings, and is 20kpa enough, if the engines on overrun?

thanks
scott

Title: Re: correct map sensor?
Post by: jrussell on September 17, 2019, 07:32:14 pm

That sensor works just fine for N/A also. There may be some weird corner case where it doesn't, but in all the non-turbo cars I've ever installed it's been with the 400kpa and it's been plenty resolution.

Title: Re: correct map sensor?
Post by: Seight-v8 on September 17, 2019, 08:19:07 pm

great, many thanks, that's all I needed to know.

its another question answered.

regards
scott