Ignition
Topics
[1] Using the Stepper Motor Driver to control Ignition
[2] Cam sync/Secondary trigger [was: confused RE: V8 sequential COP outputs]
[3] enabling camsync makes ignition pause in cycles
[4] "Short" VAG coils don't want to fire..
[5] Vr6 12v mk4 camshaft sensor settings
[6] Mitsubishi Evo 5 no spark fault
[7] SBF - Dual EDIS8 modules with Ford 4.6 COPs
[9] Crank IGN advance -> switch off fixed value possible ??
Navigation
[0] Up one level
[#] Next page
Go to full version