Author Topic: nice features to have "request"  (Read 139917 times)

Offline S.g

  • Jr. Member
  • **
  • Posts: 14
  • BHP: 0
Re: nice features to have "request"
« Reply #150 on: March 07, 2017, 07:26:53 am »
How about a straight forward anytrim where the % ethanol is used. Or a direct input from the continental Ethanol content sensor can be used in anytrim.
Some people are saying it's possible to have it work in anytrim,but no real direction ....the only thing thats out there is the display , where the gauge shows % Ethanol after changing the code in the ini file as directed. 
Wouldn't it be nice just to take the %ethanol value on the display gauge that works and use it in anytrim tables ie: %ethanol/spark trim or fuel trim or cranking pw

Offline RazOn

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 0
Re: nice features to have "request"
« Reply #151 on: June 06, 2017, 07:18:55 pm »
Need more options under "safety".

Two common things in particular:

-running lean over a certain boost (maybe even have a map). Easy to have a tired fuel pump, dirty fuel filter, weak alternator or electrical problem.
-low oil pressure. Some setups might use more oil than the pump is designed for: turbo, vtec, etc.


Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: nice features to have "request"
« Reply #152 on: June 07, 2017, 01:06:26 pm »
Need more options under "safety".

Two common things in particular:

-running lean over a certain boost (maybe even have a map). Easy to have a tired fuel pump, dirty fuel filter, weak alternator or electrical problem.
-low oil pressure. Some setups might use more oil than the pump is designed for: turbo, vtec, etc.

there is anytrim, learn to use it
Vems installer in Lithuania
[email protected]

Offline RazOn

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 0
Re: nice features to have "request"
« Reply #153 on: June 13, 2017, 11:24:07 pm »
there is anytrim, learn to use it

I'm thinking more like stuff that will shut down the engine, requires power off then back on to clear. This is to save the engine. If the pump fails or you run out of injectors, or boost goes past what the sensor can read... you can put all the correction you want... you won't get more fuel.

Same if you loose oil pressure. You don't want corrections, you want immediate shutdown.
Talking from experience here... lost an engine 2 weeks ago.

Good sales point too ;)

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: nice features to have "request"
« Reply #154 on: June 13, 2017, 11:51:42 pm »
there is anytrim, learn to use it

I'm thinking more like stuff that will shut down the engine, requires power off then back on to clear. This is to save the engine. If the pump fails or you run out of injectors, or boost goes past what the sensor can read... you can put all the correction you want... you won't get more fuel.

Same if you loose oil pressure. You don't want corrections, you want immediate shutdown.
Talking from experience here... lost an engine 2 weeks ago.

Good sales point too ;)
update to 1.2.38 and shut down your car from low oil pressure :) even 1.2.32 can do this no problem... seems that's user problem which don't know how to use features not the ecu :)
Vems installer in Lithuania
[email protected]

Offline mads b (dk)

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
Re: nice features to have "request"
« Reply #155 on: June 21, 2017, 06:56:28 am »
Hi  :D

1) I would like to have a "tuning by statistic" funktion in vemsdisplay.

2) why is vemsdisplay logs not in the same format as vemstune ?

3) a possiblity to turn on/off funktions like. antilag, launccontrol..... its alot easier then making wires  ;)

Regards Mads
Vw beach buggy 1.6 VNT turbo, Vems 3.1 no. 57

Offline Sam8888

  • Jr. Member
  • **
  • Posts: 63
  • BHP: 0
Re: nice features to have "request"
« Reply #156 on: August 07, 2017, 04:43:55 pm »
For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: nice features to have "request"
« Reply #157 on: August 07, 2017, 09:16:52 pm »
For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.
use second serial output for that :)))
Vems installer in Lithuania
[email protected]

Offline Sam8888

  • Jr. Member
  • **
  • Posts: 63
  • BHP: 0
Re: nice features to have "request"
« Reply #158 on: August 08, 2017, 12:29:06 pm »
For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.
use second serial output for that :)))

Aaaaand?
I guess you missing the point. I want to use several apps with 1 BT...

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: nice features to have "request"
« Reply #159 on: August 08, 2017, 12:37:34 pm »
For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.
use second serial output for that :)))

Aaaaand?
I guess you missing the point. I want to use several apps with 1 BT...

yea, missed that a little. sorry :)
Vems installer in Lithuania
[email protected]

Offline Sam8888

  • Jr. Member
  • **
  • Posts: 63
  • BHP: 0
Re: nice features to have "request"
« Reply #160 on: August 08, 2017, 03:52:05 pm »
For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.
use second serial output for that :)))

Aaaaand?
I guess you missing the point. I want to use several apps with 1 BT...

yea, missed that a little. sorry :)

No probs. I didn't know there's a 2nd serial output though.  ;D

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: nice features to have "request"
« Reply #161 on: August 08, 2017, 05:34:20 pm »
Vems installer in Lithuania
[email protected]

Offline fphil

  • Sr. Member
  • ****
  • Posts: 398
  • BHP: 6
Re: nice features to have "request"
« Reply #162 on: August 09, 2017, 08:38:17 am »
To disable "RPM filter, cam base trigger" during cranking when it is said "enabled" in "Primary trigger settings" (if this is not already the case, but I believe not...)

Offline Sam8888

  • Jr. Member
  • **
  • Posts: 63
  • BHP: 0
Re: nice features to have "request"
« Reply #163 on: September 04, 2017, 12:43:21 pm »
To have Acceleration enrichment TPS scale. Accel enrichment scaled by the amount of throttle opening. (Like RPM scaling, but with TPS value)

To have clt dependant revlimit. For example: above 105°C revlimit to 3000, and under 50°C 3500
« Last Edit: September 04, 2017, 01:54:56 pm by Sam8888 »

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: nice features to have "request"
« Reply #164 on: September 04, 2017, 03:40:15 pm »
To have Acceleration enrichment TPS scale. Accel enrichment scaled by the amount of throttle opening. (Like RPM scaling, but with TPS value)

To have clt dependant revlimit. For example: above 105°C revlimit to 3000, and under 50°C 3500
anytrim
Vems installer in Lithuania
[email protected]