Author Topic: Correct VR6 OBD2 Idle settings  (Read 2555 times)

Offline Bartturbo

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Correct VR6 OBD2 Idle settings
« on: October 27, 2021, 08:25:55 pm »
Hi guys iam fighting with the obd 2 throttlebody idle control. can anyone send me screenshots from the correct settings.

Thanks very much

Offline jrussell

  • Administrator
  • Full Member
  • *****
  • Posts: 216
  • BHP: 15
    • VEMS USA
Re: Correct VR6 OBD2 Idle settings
« Reply #1 on: October 27, 2021, 08:59:26 pm »
Best thing at the current time is not try to use the idle on that throttle. It's the worst throttle design I've ever seen. Use a throttle stop to get it to have a good idle between high and low idle rpms, and use ignition idle advance to dial it in.

That said, I've been working this week on trying some ideas for hardware to control that throttle. All concept so far and hope to start trying some things on the bench by the end of the week.
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo