Technical > Triggering
Mini MPi sectrig problem
FullGasCZ:
Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
FullGasCZ:
https://ibb.co/D5HQbjk
Kamuto:
--- Quote from: FullGasCZ on December 20, 2021, 09:55:20 pm ---Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
--- End quote ---
maybe your ecu is configured with hall trigger hw for secondary trigger?
FullGasCZ:
--- Quote from: Kamuto on December 21, 2021, 11:05:15 pm ---
--- Quote from: FullGasCZ on December 20, 2021, 09:55:20 pm ---Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
--- End quote ---
maybe your ecu is configured with hall trigger hw for secondary trigger?
--- End quote ---
No, ecu is configured correct. Or can i verify it somehow?
photo: https://ibb.co/M7WDYy2
Kamuto:
--- Quote from: FullGasCZ on December 22, 2021, 07:34:49 pm ---
--- Quote from: Kamuto on December 21, 2021, 11:05:15 pm ---
--- Quote from: FullGasCZ on December 20, 2021, 09:55:20 pm ---Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
--- End quote ---
maybe your ecu is configured with hall trigger hw for secondary trigger?
--- End quote ---
No, ecu is configured correct. Or can i verify it somehow?
photo: https://ibb.co/M7WDYy2
--- End quote ---
on your paper it writes sec trigger hall, and you are using VR sensor for that, so that's your answer..
Navigation
[0] Message Index
[#] Next page
Go to full version