Author Topic: AlphaN vs RPM(KPA) based ignition  (Read 1305 times)

Offline psychip

  • New Users
  • *
  • Posts: 1
  • BHP: 0
AlphaN vs RPM(KPA) based ignition
« on: July 23, 2022, 09:35:05 pm »
Hello guys, my setup is fiat coupe 2.0 16v wasted spark+dual injection. currently my VE table based on kpa (rpm) but ignition Y axis still reading from TPS.

my problem is engine extremely overheating, my primary suspect is ignition advance. so my question is, should i switch to kpa/rpm instead of tps or just reduce the values of ignition table?

the configuration file is attached

configuration
https://drive.google.com/file/d/1aOPPrmcOU87BVjODwF-cz701VegC07w1/view?usp=sharing

screenshot
https://drive.google.com/file/d/1MAmoB2Sv5XwmXVnrvyB79JX4ppZBjAgA/view?usp=sharing
« Last Edit: July 23, 2022, 09:42:56 pm by psychip »