Author Topic: Unable to get the knock detection working on a BMW M52 (V3 PNP)  (Read 3202 times)

Offline macintosh14568

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 0
Does anyone have some recommended settings to get the knock sensors working? Whenever I get the average knock value close to my knock reference average setup correctly and turn on knock detection it constantly goes off. (isknocking always on). I tried to play with the threshold for mean value with no luck.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Unable to get the knock detection working on a BMW M52 (V3 PNP)
« Reply #1 on: April 08, 2022, 12:29:01 pm »
Does anyone have some recommended settings to get the knock sensors working? Whenever I get the average knock value close to my knock reference average setup correctly and turn on knock detection it constantly goes off. (isknocking always on). I tried to play with the threshold for mean value with no luck.
base settings from menus are quite good :))
Vems installer in Lithuania
[email protected]