Author Topic: Question about 60-2 trigger with camsyns and VR polarity (logs inside) (Read 22831 times)

ZoLtaR · « **Reply #30 on:** March 27, 2011, 04:15:04 pm »

Allright, finally I get it to work properly. According to coil wiring ignition table now looks like below and everything works well. Every ignition event is now where it have to be. Marks on cam gear helped a lot.

4
3
1
2

Big thanks to mattias.

News:

Author Topic: Question about 60-2 trigger with camsyns and VR polarity (logs inside) (Read 22831 times)

ZoLtaR

Re: Question about 60-2 trigger with camsyns and VR polarity (logs inside)