Author Topic: VemsDisplay - gauge descriptor editing, warning light  (Read 6759 times)

Offline BigD

  • Full Member
  • ***
  • Posts: 111
  • BHP: 6
VemsDisplay - gauge descriptor editing, warning light
« on: October 25, 2013, 04:19:10 am »
Guys, any plans to release a version of vemsdisplay with a descriptor editor like for normal VT? I am converting the car to eliminate the cluster and I have all the info inputs to the ecu but no way to show it nicely like oil pressure, fuel level. I'm limited to ADC calc gauges.

Also, could you add a feature to the gauges to change color, flash, illuminate a section of the gauge face, to act as a warning light for that gauge (oil pressure too low, low fuel etc)


Offline BigD

  • Full Member
  • ***
  • Posts: 111
  • BHP: 6
Re: VemsDisplay - gauge descriptor editing, warning light
« Reply #1 on: December 09, 2013, 07:03:12 pm »
Bueller? Bueller?

Does anyone know of a development wiki showing upcoming features for the android app?

Offline mads b (dk)

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
Re: VemsDisplay - gauge descriptor editing, warning light
« Reply #2 on: December 10, 2013, 11:27:21 am »
I am also eager to know about it  :)
Vw beach buggy 1.6 VNT turbo, Vems 3.1 no. 57

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: VemsDisplay - gauge descriptor editing, warning light
« Reply #3 on: March 06, 2014, 05:27:45 pm »
New VemsDisplay version has just been released (3.2), for details see: http://www.vems.hu/android/

Most noticeable changes, ADC cal inputs are now correctly scaled also in VemsDisplay, using the same dataset as on VemsTune; ADC Cal channel names as selected in VemsTune is still pending but will follow soon.

More details on setting up ADC cal: http://vems.hu/vt/help/v3/v3_VemsDisplay_calibration.html

Best regards, Dave
« Last Edit: March 06, 2014, 05:32:25 pm by VEMS »

Offline BigD

  • Full Member
  • ***
  • Posts: 111
  • BHP: 6
Re: VemsDisplay - gauge descriptor editing, warning light
« Reply #4 on: June 25, 2014, 02:01:02 pm »
Finally fired it up for the first time with the tablet dash! Working great, just waiting on an update to be able to change the analog gauge descriptors

https://www.youtube.com/watch?v=1JDNOI4nNDE

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: VemsDisplay - gauge descriptor editing, warning light
« Reply #5 on: July 18, 2014, 07:12:36 pm »
Hello BigD,

New VemsDisplay released with some features that might interest you, more info: http://vems.hu/android/

Best regards, Dave

Offline Thiago

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Re: VemsDisplay - gauge descriptor editing, warning light
« Reply #6 on: May 11, 2020, 04:29:13 am »
Hello, sorry for diging into this post. Does anyone know how to change the name for the ADC CALC gauge individually in VemsDisplay?

When i change in Gauge Description, it changes all gauges adc255 type... I wanted to name individually the ADC CAL gauges as for Fuel Pressure, Oil Pressure, Potentiometer, etc

Thanks in advance!