Author Topic: Audi B5 RS4 Avant 2001 with DBW  (Read 12030 times)

Offline Sukhoi

  • Jr. Member
  • **
  • Posts: 60
  • BHP: 6
Audi B5 RS4 Avant 2001 with DBW
« on: November 05, 2013, 09:59:37 pm »
Hi,

here is another project that we have done lately, the Audi now works perfectly and smooth, the next step will be adding ARP head studs and thicker head gasket for extra boost, it was tricky to control the DBW throttle but we managed to start the engine.

Project Status: VEMS installed.
Location: Amman-Jordan car originally from Saudi Arabia .
Car: Audi B5 RS4 Avant 2001.
Engine: Code AZR - 2.7L V6 BiTurbo.
Engine Build: full stock engine.
Boost: Stock Boost.
Fuel: 95 Octane.
ECU: VEMS 3.6 / Stock Harness.
Trigger System: Stock 60-2 trigger / Cams-Sync.
VEMS Motorsport options: Launch Control, WOT Shift.


Here a youtube link that I recorded for the engine idling, soon hopefully I will post some photos.

http://www.youtube.com/watch?v=NkNF6n5oLjQ


Thanks for all the guys that shared info to start this engine :)

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Audi B5 RS4 Avant 2001 with DBW
« Reply #1 on: November 06, 2013, 09:20:35 am »
nice
Vems installer in Lithuania
[email protected]

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: Audi B5 RS4 Avant 2001 with DBW
« Reply #2 on: November 07, 2013, 12:32:02 pm »
Congratulations, very well done!

Best regards, Dave

Offline Sukhoi

  • Jr. Member
  • **
  • Posts: 60
  • BHP: 6
Re: Audi B5 RS4 Avant 2001 with DBW
« Reply #3 on: November 07, 2013, 08:00:51 pm »
Thanks guys

here some photos, hope to add more soon




Offline tonci

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 1
Re: Audi B5 RS4 Avant 2001 with DBW
« Reply #4 on: December 22, 2016, 11:50:40 am »
Did you manage to get A/C working with vems? If you did how?

Offline NOTORIOUS VR

  • Full Member
  • ***
  • Posts: 213
  • BHP: 5
Re: Audi B5 RS4 Avant 2001 with DBW
« Reply #5 on: January 11, 2017, 08:18:34 pm »
Hi,

here is another project that we have done lately, the Audi now works perfectly and smooth, the next step will be adding ARP head studs and thicker head gasket for extra boost, it was tricky to control the DBW throttle but we managed to start the engine.

Project Status: VEMS installed.
Location: Amman-Jordan car originally from Saudi Arabia .
Car: Audi B5 RS4 Avant 2001.
Engine: Code AZR - 2.7L V6 BiTurbo.
Engine Build: full stock engine.
Boost: Stock Boost.
Fuel: 95 Octane.
ECU: VEMS 3.6 / Stock Harness.
Trigger System: Stock 60-2 trigger / Cams-Sync.
VEMS Motorsport options: Launch Control, WOT Shift.


Here a youtube link that I recorded for the engine idling, soon hopefully I will post some photos.

http://www.youtube.com/watch?v=NkNF6n5oLjQ


Thanks for all the guys that shared info to start this engine :)

Very nice, but can I ask what you did to make the tacho work?  Normally the kombi/cluster gets this info via CANbus from the ECU.

Is there an input for engine speed that works with the tacho out on the VEMS that you can share?

Thanks,