Author Topic: My Vemstune corrupts data  (Read 3304 times)

Offline perboddum

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 0
My Vemstune corrupts data
« on: April 16, 2014, 02:09:55 pm »
Hi
Just a warning....
My vemstune 1.5.24 (2014-01-08) corrupts my VE and ignition table MAP/TPS settings.
This happens when I edit data in 3D editor. It is bad when you run Alpha-N.
My TPS was 0-1-2-3-5-7......
After 3D edit vemstune changed this to
0-1-1-3-5-7......
in the VE table (not 3D editor)
That confuses vems ECU and the car runs really bad.
The VE/IGN data does not seem to be changed. Only TPS/MAP settings.
I have issued a bug report and hope it will be fixed.

regards
Per

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: My Vemstune corrupts data
« Reply #1 on: April 16, 2014, 02:39:19 pm »
Hello Per,

We have received your report, issue is under investigation.

It is triggered when issuing BURN command from 3D table editor, corruption is contained to Alpha-N TPS axis only (not MAP/RPM axis or tables values)
Workaround to be able to perform useful tuning in the meantime (when using Alpha-N), use 2d table editor during real-time mapping until fix is released.

Best regards, Dave