Author Topic: 1.2.28  (Read 3950 times)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
1.2.28
« on: October 28, 2014, 09:36:35 pm »
So I was testing this release and it does start up faster vs 1.2.20 when you have one camsync for instance.

Can´t VemsTune populate the CLT / IGN table when uploading a converted map with at least zero values, as clearly the older map couldn´t have had reasonable values there ?

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: 1.2.28
« Reply #1 on: November 03, 2014, 11:39:52 am »
Hello Gunni,

Vt currently cannot auto fill this table because of the way its mapped in memory space (unfortunately) but we made several validation warnings to notify users if table appears not reasonably filled.

Best regards, Dave

Offline BigD

  • Full Member
  • ***
  • Posts: 111
  • BHP: 6
Re: 1.2.28
« Reply #2 on: November 06, 2014, 01:43:34 am »
When is the next FW going to be "released"ed? The last one listed is 1.2.11

Thanks,
Dmitry

Offline UrSobsessed

  • Jr. Member
  • **
  • Posts: 30
  • BHP: 0
Re: 1.2.28
« Reply #3 on: November 10, 2014, 01:59:40 am »
With regards to 1.2.28, what are the differences between this and 1.2.27?  .28 isn't even listed in firmware wiki page.