Author Topic: Can I mod to auditrigger board hardware??  (Read 3279 times)

Offline smurfinator

  • Full Member
  • ***
  • Posts: 127
  • BHP: -20
Can I mod to auditrigger board hardware??
« on: May 14, 2016, 03:18:48 am »
My 3.8 is set up for 60-2 and cam sync, but have the 60-2 on the front of the motor is causing me problems.  Can I send the board in to outfit for audi trigger in the old flywheel with odd number of teeth?  Who do I talk to about that?

Thanks!
Audi ABZ 4.2 V8 in 1993 90 quattro
TTV 60-2 flywheel and cam sync
firmware: 1.2.20

Smurf blue (BMW Laguna Seca), hence the name!

Offline mc2226

  • Jr. Member
  • **
  • Posts: 20
  • BHP: 1
Re: Can I mod to auditrigger board hardware??
« Reply #1 on: June 19, 2016, 06:23:30 pm »
i had primary trigger hall and secondary trigger hall and i converted to auditrigger setup..

you can find everything here: http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FInputTriggerHardWare
and here: http://www.vems.hu/wiki/index.php?page=InputTrigger%2FAudiTrigger

bene