« previous next »
Pages: [1]

Author Topic: setting up display-only round  (Read 6078 times)

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
setting up display-only round
« on: August 10, 2016, 08:07:18 am »
Hi, I'm trying to set up my display-only round following this guide: http://www.vems.hu/manual/vemstune/help2/htmls/main/aim.html#conf_methods I tried offline method with one serial cable but I got stuck where it says to connect v3 to vemstune, I can't seem to find display menu/round main display dialog/AIM port button anywhere in vemstune v3 menu. firmware 1.2.31, round firmware 1.5.8. Could anyone please help me?
« Last Edit: August 10, 2016, 08:40:25 am by iwbs »
Logged

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: setting up display-only round
« Reply #1 on: August 10, 2016, 05:46:58 pm »
You need inverted pinout for it, that is usually the problem.
Logged

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
Re: setting up display-only round
« Reply #2 on: August 10, 2016, 06:16:57 pm »
If you mean that short wire which inverts pinouts, then I have it. Bought the round from you and also got this short inverter wire. Uploaded the firmware to round and set up slots for display, but I just can't find this AIM port button to set the proper com port.
Logged

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
Re: setting up display-only round
« Reply #3 on: August 10, 2016, 07:35:45 pm »
Looks like I got it all sorted out now, Uploaded firmware 0.5.8 which is AIM compatible unlike 1.5.8
Logged
Pages: [1]
« previous next »