Author Topic: No start- erratic crank signal  (Read 3371 times)

Offline sacrifice

  • Jr. Member
  • **
  • Posts: 2
  • BHP: 0
No start- erratic crank signal
« on: September 06, 2017, 02:31:40 pm »
Hey guys,

So Ive swapped a volvo t5 motor into my e36. Got vems all wired up but I have ano start condition. Injectors click and fire as they should. I only have spark at immediate cranking and right at the end of cranking as I turn the key off. RPM signal is all over the map, which would cause the erratic spark. Right nos I do not have the computer we are using to tune in front of me but I will grab firmware version asap. Attached I have my config and a log of cranking.

OEM volvo coils
Factory VR crank sensor
Factory hall cam sensor
15th tooth is cylinder 1 TDC.

No idea how to attach the config and logs. If someone could help that would be great or I can email them.
« Last Edit: September 06, 2017, 02:41:17 pm by sacrifice »

Offline wersch

  • Jr. Member
  • **
  • Posts: 60
  • BHP: 1
  • ECU installer in Sweden
Re: No start- erratic crank signal
« Reply #1 on: September 06, 2017, 05:32:12 pm »
Upload a image of the triggerlog as a image.
Your problem might be the crank sensor, as it is a known problem on these machines.

Offline sacrifice

  • Jr. Member
  • **
  • Posts: 2
  • BHP: 0
Re: No start- erratic crank signal
« Reply #2 on: September 10, 2017, 05:57:41 pm »




Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: No start- erratic crank signal
« Reply #3 on: September 10, 2017, 08:53:38 pm »
tools/record trigger log, that would help a lot
Vems installer in Lithuania
[email protected]