Author Topic: Peugeot 306 Estate with GTi6 engine  (Read 9228 times)

Offline ronj

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Peugeot 306 Estate with GTi6 engine
« on: April 01, 2017, 01:30:08 pm »
Hi all,

I am Ron from the Netherlands, and I daily drive a Peugeot 306 Estate (called Break over here) with all GTi6 running gear. The modification list so far is quite extensive but some highlights:

- Completely rebuilt XU10J4RS engine with VEMS, putting out factory power on the DynaPack @DP-Engineering.
- GTi6 suspension and brakes.
- C5 "Steelies" 15" with Toyo Proxes T1R.
- Custom in-dash "computer" based on Teensy 3.1 microcontroller.
- Tablet with Timur's kernel running VEMS Display and DashCommand.
- Custom RS232 to WiFi dongle base on ESP8266 capable of both passing through VEMS data or parsing AIM data and sending it as ELM commands to DashCommand (or any other ELM/OBD compatible application).














I think next step is boost. Since I live close to DP-Engineering I guess they are going to supply all the needed gear.

Stay tuned!