Author Topic: ign.advance idle control, won't work  (Read 2883 times)

Offline Rak

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
ign.advance idle control, won't work
« on: May 02, 2018, 08:13:07 pm »
Been trying to control idle via ign. advance,  seems like it doesnt work.

Spark angle doesn't chance in vemstune, even when idle rpms are 100-150 too high or too low.

Config:
http://vems.hu/vemstune/sharingcenter/reports.php?cmd=view&key=8mMx7m

Vemstune 1.5.57

« Last Edit: May 02, 2018, 08:14:52 pm by Rak »
V3.3 1652
FW 1.2.38

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: ign.advance idle control, won't work
« Reply #1 on: May 03, 2018, 12:58:07 am »
Been trying to control idle via ign. advance,  seems like it doesnt work.

Spark angle doesn't chance in vemstune, even when idle rpms are 100-150 too high or too low.

Config:
http://vems.hu/vemstune/sharingcenter/reports.php?cmd=view&key=8mMx7m

Vemstune 1.5.57


post log
Vems installer in Lithuania
[email protected]

Offline jrussell

  • VEMS USA
  • Administrator
  • Full Member
  • *****
  • Posts: 221
  • BHP: 15
    • VEMS USA
Re: ign.advance idle control, won't work
« Reply #2 on: May 03, 2018, 01:25:12 pm »
If your idle control strategy is on/off it won't work. It needs to be pwm, even if you don't have a valve.
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo

Offline Rak

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Re: ign.advance idle control, won't work
« Reply #3 on: May 05, 2018, 12:41:42 pm »
Switched control strategy  to pwm,  it works!
Thank you  :)
V3.3 1652
FW 1.2.38