Author Topic: Audi Aan 5 cyl Vems Setup for standard app and if used Vems can be used  (Read 2011 times)

Offline Joy

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Hi Forum.

Nice to meet you.i am just starting here and trying to get into Vems,located in Germany.

I would like to install the Vems to an  AAn version on my Audi 5 cylinder engine, the Motronic 55 one.
1.I dont understand the differences to be chosen before ordering or what you would recommend for a slightly nodified engine?Mat PTc,NtC?
Which harness and setup would you recommend as a start?
2. A friend of mine offered me an old Vems for this engine but has no information about it.
How can i find out which setup it has?
Is there anything i should avoid as it is an old Vems(firmware,etc)


Thank you very much for your help.


Br


Horst

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Audi Aan 5 cyl Vems Setup for standard app and if used Vems can be used
« Reply #1 on: February 09, 2021, 05:05:53 pm »
1. You should contact a VEMS dealer in Germany and heĀ“ll take care of sorting you out, I happen to be a German dealer so you can contact me and then receive support from me.

2. It all depends on your setup, and the ECU he has, you can email vems and ask for the specifications of it.

You can update all VEMS ecus to latest firmware.