Author Topic: Progressive Nitrous using TPS  (Read 299 times)

Offline jderimig

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Progressive Nitrous using TPS
« on: February 05, 2019, 02:28:03 am »
My first post and I apologize if this has been covered,  I used search.

I understand that boost control can be setup open loop to control the duty cycle of a solenoid mapped to rpm.  My question is can I use the tps factor also in this mode?  For example I would like the DC mapped to TPS also or alternatively to RMP.

Offline MWfire

  • Hero Member
  • *****
  • Posts: 700
  • BHP: 35
Re: Progressive Nitrous using TPS
« Reply #1 on: February 11, 2019, 03:48:33 pm »
Yes, you can use that for progressive nitrous if you have pwm solenoids. But you need to use 2-3 outputs in parallel, because current is big(30A).