Author Topic: Cam Sync Hall Sensor +12V ?  (Read 4389 times)

Offline 190E_Will

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 0
Cam Sync Hall Sensor +12V ?
« on: February 06, 2019, 08:45:05 pm »
Hi

Whilst wiring my engine I accidentally wired the Cam Sync Hall Sensor to 12v instead of 5v and subsequently sleeved the splice with heatshrink tubing.

Will the Hall sensor operate ok without damage to the ECU if supplied with 12v instead of 5v?

Thanks in advance.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Cam Sync Hall Sensor +12V ?
« Reply #1 on: February 07, 2019, 06:27:50 pm »
Hi

Whilst wiring my engine I accidentally wired the Cam Sync Hall Sensor to 12v instead of 5v and subsequently sleeved the splice with heatshrink tubing.

Will the Hall sensor operate ok without damage to the ECU if supplied with 12v instead of 5v?

Thanks in advance.

no problem because hall sensor pulls output to ground, but, if hall sensor itself is not designed to accept 12v it may die :)
Vems installer in Lithuania
[email protected]