Author Topic: '83 BMW 628csi S38B38 project  (Read 57 times)

Offline Timmo6

  • New Users
  • *
  • Posts: 40
  • BHP: 2
'83 BMW 628csi S38B38 project
« on: July 04, 2019, 04:43:28 pm »
Hi all,
Back from a while I am going to collect my vems v3.3 board again and start a new project for my full restoration 628csi project.
The car is at the bodyshop for a full restauration so I have the time to put things together regarding vems.
As I used the board for a 4cyl bmw518i with Hall pick up I need to resolder the board and adapt it for a 6cyl S38B38 with COP and VR pickup.
I bought a new VEMS wiringloom to Ensure a clean setup.
I have a few questions which I will post in the proper topic.
grtz
Tim