Author Topic: V3.3 board converting to VR  (Read 5280 times)

Offline Timmo6

  • Jr. Member
  • **
  • Posts: 43
  • BHP: 3
V3.3 board converting to VR
« on: July 04, 2019, 12:55:22 pm »
HI,
I am converting my v3.3 board from primary Hall to primary VR setup.
I am a little bit confused as in the documents someone instructs to Unsolder R30 and a bit further they instruct to solder a 18k resistor on the place of R30?
Can somebody clarify this?
Thanks
Tim