Author Topic: PWM Output  (Read 16311 times)

Offline Reini1977

  • Jr. Member
  • **
  • Posts: 14
  • BHP: 0
PWM Output
« on: July 25, 2019, 02:26:32 pm »
hi all

is there a possibilty to configure a output as rpm dependent PWM?

regards

Reinhold

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: PWM Output
« Reply #1 on: July 25, 2019, 05:45:22 pm »
hi all

is there a possibilty to configure a output as rpm dependent PWM?

regards

Reinhold
yes possible,for what function you need it?
Vems installer in Lithuania
[email protected]

Offline Reini1977

  • Jr. Member
  • **
  • Posts: 14
  • BHP: 0
Re: PWM Output
« Reply #2 on: July 26, 2019, 09:28:51 am »
thank you, good news :-)

i would need it for the Bordcomputer of a Audi 200, the consumption signal "Verbrauchssignal"

its a 0 - 12 Volt square wave, one high pulse of 0.4msecs per injector firing...


i thought, i will use an extra injector outout, convert this to DC, this DC is converted to PWM with 5 times higher speed...not very elegant, but should work

hopefully theres a better solution...

is it allowed to post links?

regards