Author Topic: How to force Idle valve to follow PPS ? Anytrim add  (Read 96 times)

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
How to force Idle valve to follow PPS ? Anytrim add
« on: August 23, 2019, 09:50:33 pm »
Hi,

Is there any chance to have new OS version with ability to change DC of the idle valve based on PPS ?

Or ...   Idle valve follow PPS  (now there is just follow TPS feature).

Stock cars are using idle valve to do smooth light pedal acceleration by opening more Idle valve, instead of ITB. This will help me a lot.
I know that it might be more complicated to do it within regular tables however if Anytrim will have that option it would be great.

Than easily set ETC target table like PPS 5% >> TPS 0
and let follow PPS 0 - 5  by idle valve DC by step like 5 or 10 % of DC....

Actually anyway how to force Idle valve to follow PPS will significantly improve ETC system usage.

Eventually if there is option to "order" this feature for some payment, it still might be an option for me.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 768
  • BHP: 16
Re: How to force Idle valve to follow PPS ? Anytrim add
« Reply #1 on: August 26, 2019, 03:45:42 am »
Hi,

Is there any chance to have new OS version with ability to change DC of the idle valve based on PPS ?

Or ...   Idle valve follow PPS  (now there is just follow TPS feature).

Stock cars are using idle valve to do smooth light pedal acceleration by opening more Idle valve, instead of ITB. This will help me a lot.
I know that it might be more complicated to do it within regular tables however if Anytrim will have that option it would be great.

Than easily set ETC target table like PPS 5% >> TPS 0
and let follow PPS 0 - 5  by idle valve DC by step like 5 or 10 % of DC....

Actually anyway how to force Idle valve to follow PPS will significantly improve ETC system usage.

Eventually if there is option to "order" this feature for some payment, it still might be an option for me.



usually cars with electric throttle does not have aditional idle valve :)
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
Re: How to force Idle valve to follow PPS ? Anytrim add
« Reply #2 on: September 17, 2019, 05:43:03 pm »
Yea but S54 S62 has, which is actually my case :D

Offline MWfire

  • Hero Member
  • *****
  • Posts: 706
  • BHP: 35
Re: How to force Idle valve to follow PPS ? Anytrim add
« Reply #3 on: September 18, 2019, 02:54:30 pm »
I did few s52b32 with IAC and DBW without problem.

Di you put idle active treshold to pps1?