Author Topic: PWM output freq. issue....  (Read 4694 times)

Offline rossi46numberone

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
PWM output freq. issue....
« on: February 09, 2011, 09:22:59 am »
Hi,
I've tried to use the PWM output to drive my Pololu/thorttle body systems,but the problem is that the frequency output is too low,250 Hz is not enough :'(.
I need around 10 Khz,is there a solution to reach this frequency needed?

Offline Denmark

  • Hero Member
  • *****
  • Posts: 541
  • BHP: 7
Re: PWM output freq. issue....
« Reply #1 on: February 09, 2011, 10:08:11 pm »
the newagde subaru is also 1khz,


/Skassa
working on the boxer