Author Topic: Crank IGN advance -> switch off fixed value possible ??  (Read 3600 times)

Offline Mac-B

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Crank IGN advance -> switch off fixed value possible ??
« on: January 16, 2020, 08:15:03 am »
Hello,

I´m struggeling a bit with this setting.

The IGN map has values around 10° advance at low rpms.
The CLT / TPS map has additional 14° advance @-10°C and 0° @60°C
This results in typical IGN advance of 22°C in idle at temps of 10°C CLT

The standard setting of Crank IGN advance is 12° advance. So I was getting no start issues at low temps.
Now i set the crank IGN advance to 20° and the engine starts nicely again.

Now the question: Wouldn´t it be better to have a dynamic setting of  Crank IGN advance (at least if CLT/TPS IGN advance is configured) ?
Or is there a hidden / undocumented setting of disabling fixed crank IGN advance ? (setting it to 255 or something) ?

Thanks for your answers in advance ;-)
Marcus
« Last Edit: January 16, 2020, 02:35:25 pm by Mac-B »

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Crank IGN advance -> switch off fixed value possible ??
« Reply #1 on: January 17, 2020, 04:26:35 pm »
If 20° works both hot and cold use that.