Author Topic: AIM and other protocols  (Read 4785 times)

Offline mr_g

  • Full Member
  • ***
  • Posts: 205
  • BHP: 9
AIM and other protocols
« on: June 05, 2009, 06:36:22 pm »
Is there any documentation about AIM protocol and new VEMS protocol?

Standard AIM doesn't have injector time. Can this be added?

If I understood correctly, VEMS is sending this data (AIM) through UART, asked or not? What is the default frequency of sending it?


Offline [email protected]

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: AIM and other protocols
« Reply #1 on: June 05, 2009, 07:36:46 pm »
In theory the injector time could be added, a little while ago I looked at writing extensions to the protocol using the 'spare' channel numbers.
But that would break the protocol support.
VEMS streams AiM unless asked not to.
It sends a variable length packet 10 times a second at (IIRC) 19200baud

Offline mr_g

  • Full Member
  • ***
  • Posts: 205
  • BHP: 9
Re: AIM and other protocols
« Reply #2 on: June 05, 2009, 07:45:20 pm »
Nice. Only injector time is missing, and that would be enough information for board comp and trip times...