News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Help Uploading config to ecu

Started by Benzoo, October 24, 2019, 06:02:37 PM

Previous topic - Next topic

Benzoo

Hello, I recently purchased a Audi, and the previous owner “forgot” the password to the vems v3 ecu so I am having troubles uploading a new config onto the ecu because once I boot loop and update firmware it will update up until the part to upload  a new config, than asks for password authentication in order to upload a config. Does anyone know how to forcefully remove the password authentication or should I purchase a new board any help would be greatly appreciated due to I don’t know much thank you!

Kamuto

Quote from: Benzoo on October 24, 2019, 06:02:37 PM
Hello, I recently purchased a Audi, and the previous owner “forgot” the password to the vems v3 ecu so I am having troubles uploading a new config onto the ecu because once I boot loop and update firmware it will update up until the part to upload  a new config, than asks for password authentication in order to upload a config. Does anyone know how to forcefully remove the password authentication or should I purchase a new board any help would be greatly appreciated due to I don’t know much thank you!
write email for vems and maybe they will tell you what the password is :) as I remember password is generated by vems
Vems installer in Lithuania
[email protected]