Author Topic: rotational idle or cyclical idle on VEMS?  (Read 2795 times)

Offline Jimmaey

  • New Users
  • *
  • Posts: 1
  • BHP: 0
rotational idle or cyclical idle on VEMS?
« on: February 19, 2020, 03:15:25 pm »
hey all , i was wondering if there is a way to inplement rotational or cyclical idle like a Vipec ECU ?? i have seen it been used in hillclimb is characterized by a rapid up and down going idle. It is supposed to  be benificial for the cooldown of the engine and turbo after hard pulls. its a pulsating idle randing between 800 and 1500 rpm.
here is an example on a R32 with both cases of rotational idle settings

https://www.youtube.com/watch?v=QEoMKlz-bvM

so is there a way to set up idle as the fuel based table like the haltech ecu?

« Last Edit: February 19, 2020, 03:34:41 pm by Jimmaey »

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: rotational idle or cyclical idle on VEMS?
« Reply #1 on: March 02, 2020, 05:35:34 pm »
hey all , i was wondering if there is a way to inplement rotational or cyclical idle like a Vipec ECU ?? i have seen it been used in hillclimb is characterized by a rapid up and down going idle. It is supposed to  be benificial for the cooldown of the engine and turbo after hard pulls. its a pulsating idle randing between 800 and 1500 rpm.
here is an example on a R32 with both cases of rotational idle settings

https://www.youtube.com/watch?v=QEoMKlz-bvM

so is there a way to set up idle as the fuel based table like the haltech ecu?

use overrun fuel cut for that, works really nice
Vems installer in Lithuania
[email protected]

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: rotational idle or cyclical idle on VEMS?
« Reply #2 on: March 02, 2020, 10:12:05 pm »
You can make all that idles, but the truth is that normal idle is the fastest way to cool down the engine. But not so interesting for public.