Author Topic: Read Serial data from RoundV2  (Read 124 times)

Offline modemlamer

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Read Serial data from RoundV2
« on: April 29, 2020, 12:35:38 pm »
hi,

i recently installed my VEMS ROUND V2 package. All works fine.
In VemsTune i can see the live Data from WBO2 and EGT.
Next step is to read the serial datastream from RoundV2 and integrate these information to my already installed car-pc where i have oil-temp, oil-press and boost-level gauages.
The only data i can read is "Booted" once the RoundV2 got power.
What I#m missing. With my Win7 Laptop and VEMSTune all works fine.

are there special command wich i have to send via serial-console to roundV2??

greetings from germany


i edit this post, because i'm not allowed to reply here.

==>hi, thanks for youre advice.
I know that wiki, but how do i ask a question there?

« Last Edit: April 30, 2020, 06:53:19 pm by modemlamer »

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 789
  • BHP: 19
Re: Read Serial data from RoundV2
« Reply #1 on: April 29, 2020, 11:33:22 pm »
hi,

i recently installed my VEMS ROUND V2 package. All works fine.
In VemsTune i can see the live Data from WBO2 and EGT.
Next step is to read the serial datastream from RoundV2 and integrate these information to my already installed car-pc where i have oil-temp, oil-press and boost-level gauages.
The only data i can read is "Booted" once the RoundV2 got power.
What I#m missing. With my Win7 Laptop and VEMSTune all works fine.

are there special command wich i have to send via serial-console to roundV2??

greetings from germany

hi, you should ask that question in vems wiki, I believe guys there will answer your question, it will take some time but you will get the answer, it's possible that you have to send some symbol first and then it will give you some stream
Vems installer in Lithuania
valdas.sunokas@gmail.com