Author Topic: VEMS failing to boot  (Read 33 times)

Offline msh

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
VEMS failing to boot
« on: June 19, 2020, 11:55:01 pm »
The following problem has appeared - upon turning on ignition, there's very high probability that this will appear on LCD and nothing more will happen; apparently the ECU doesn't boot up



Unplugging that LCD increases likelihood that ECU will boot VERY MUCH, from few percent likelihood to over 50% i.e. even if ECU won't boot on first try, it will certainly boot on second try. Once it's up, it runs fine.

Board, IIRC, is v3.8.

Any suggestions?