Technical > Triggering

Nissan Trigger Problems 16 12 8 4 (ca18det)

(1/3) > >>

derill3237:
Help solve the problem ..
I connected a wems on the table (firmware 1.2.11).
Connected CAS ca18det ..

The trigger does not display a signal from the camshaft sensor ...

Attached config and triggerlog ..

http://wdfiles.ru/jenE
http://wdfiles.ru/f2f7

gunni:
Are you able to measure the signal output of the CAS via a scope or at least a multimeter?

gox:
Board set for hall trigger?

derill3237:

--- Quote from: gox on July 24, 2020, 04:25:16 pm ---Board set for hall trigger?

--- End quote ---
Yes

derill3237:

--- Quote from: gunni on July 24, 2020, 03:46:54 pm ---Are you able to measure the signal output of the CAS via a scope or at least a multimeter?

--- End quote ---
Secondery trigger 4.52 - 0.09V
Primary trigger 2.05 - 0.05V

Navigation

[0] Message Index

[#] Next page