Author Topic: Upgrade bootloader fail  (Read 2131 times)

Offline Timmo6

  • Jr. Member
  • **
  • Posts: 43
  • BHP: 3
Upgrade bootloader fail
« on: December 09, 2020, 09:03:45 am »
Hi,
I tried to upgrade the bootloader on my old V3.3 board as per instructions in the VemsTune help files with the ISPcable and the AVR pocket programmer which I buyed from the Vems webshop but the lock 3C procedure did not succeed.
What can I try next?
Thanks for help.
Microsoft Windows [versie 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle rechten voorbehouden.

C:\Users\Timmo6>cd\

C:\>avrdude -c usbtiny -p m128 -U lfuse:w:0x2f:m -U hfuse:w:0xc4:m -U efuse:w:0x
ff:m -U lock:w:0x3c:m

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e9702
avrdude: current erase-rewrite cycle count is -50462977 (if being tracked)
avrdude: reading input file "0x2f"
avrdude: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.01s

avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0x2f:
avrdude: load data lfuse data from input file 0x2f:
avrdude: input file 0x2f contains 1 bytes
avrdude: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.01s

avrdude: verifying ...
avrdude: 1 bytes of lfuse verified
avrdude: reading input file "0xc4"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.01s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0xc4:
avrdude: load data hfuse data from input file 0xc4:
avrdude: input file 0xc4 contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.01s

avrdude: verifying ...
avrdude: 1 bytes of hfuse verified
avrdude: reading input file "0xff"
avrdude: writing efuse (1 bytes):

Writing | ################################################## | 100% 0.01s

avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xff:
avrdude: load data efuse data from input file 0xff:
avrdude: input file 0xff contains 1 bytes
avrdude: reading on-chip efuse data:

Reading | ################################################## | 100% 0.01s

avrdude: verifying ...
avrdude: 1 bytes of efuse verified
avrdude: reading input file "0x3c"
avrdude: writing lock (1 bytes):

Writing |                                                    | 0% 0.00s ***faile
d;
Writing | ################################################## | 100% 0.08s

avrdude: 1 bytes of lock written
avrdude: verifying lock memory against 0x3c:
avrdude: load data lock data from input file 0x3c:
avrdude: input file 0x3c contains 1 bytes
avrdude: reading on-chip lock data:

Reading | ################################################## | 100% 0.01s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0x3c != 0x2c
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


Offline Timmo6

  • Jr. Member
  • **
  • Posts: 43
  • BHP: 3
Re: Upgrade bootloader fail
« Reply #1 on: December 23, 2020, 05:28:46 pm »
Solved😑