Print Page - Priming, Cranking setup Help

Title: Priming, Cranking setup Help
Post by: Mark0 on February 25, 2017, 12:41:12 PM

Hi, it seems that "Priming, Cranking & Afterstart Setup" help page (F1) doesn't display anything, just white screen. Noticed this in previous versions too. Right no running 1.5.46 version of VemsTune.

Not big deal, but still :O

Title: Re: Priming, Cranking setup Help
Post by: wersch on February 26, 2017, 12:16:35 PM

Update Vemstune and ini files, this is a old version.
I have 1.5.51 and there the help meny of this works.

Title: Re: Priming, Cranking setup Help
Post by: Mark0 on February 26, 2017, 12:43:07 PM

Quote from: wersch on February 26, 2017, 12:16:35 PM
Update Vemstune and ini files, this is a old version.
I have 1.5.51 and there the help meny of this works.

Thanks, will update.

Title: Re: Priming, Cranking setup Help
Post by: XanxusNagi on October 03, 2017, 10:39:25 AM

Can you describe what your mesh has that causes this problem?

VEMS Community Forum

Technical => Documents => Topic started by: Mark0 on February 25, 2017, 12:41:12 PM