Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
(http://C:%5CUsers%5Cpc%5CDownloads%5C1)
https://ibb.co/D5HQbjk
Quote from: FullGasCZ on December 20, 2021, 09:55:20 PM
Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
(http://C:%5CUsers%5Cpc%5CDownloads%5C1)
maybe your ecu is configured with hall trigger hw for secondary trigger?
Quote from: Kamuto on December 21, 2021, 11:05:15 PM
Quote from: FullGasCZ on December 20, 2021, 09:55:20 PM
Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
maybe your ecu is configured with hall trigger hw for secondary trigger?
No, ecu is configured correct. Or can i verify it somehow?
photo: https://ibb.co/M7WDYy2
Quote from: FullGasCZ on December 22, 2021, 07:34:49 PM
Quote from: Kamuto on December 21, 2021, 11:05:15 PM
Quote from: FullGasCZ on December 20, 2021, 09:55:20 PM
Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
maybe your ecu is configured with hall trigger hw for secondary trigger?
No, ecu is configured correct. Or can i verify it somehow?
photo: https://ibb.co/M7WDYy2
on your paper it writes sec trigger hall, and you are using VR sensor for that, so that's your answer..
Quote from: Kamuto on December 30, 2021, 06:42:10 AM
Quote from: FullGasCZ on December 22, 2021, 07:34:49 PM
Quote from: Kamuto on December 21, 2021, 11:05:15 PM
Quote from: FullGasCZ on December 20, 2021, 09:55:20 PM
Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
maybe your ecu is configured with hall trigger hw for secondary trigger?
No, ecu is configured correct. Or can i verify it somehow?
photo: https://ibb.co/M7WDYy2
on your paper it writes sec trigger hall, and you are using VR sensor for that, so that's your answer..
Really? i see Sec trig VR, where is the problem?
Quote from: FullGasCZ on January 04, 2022, 07:42:51 AM
Quote from: Kamuto on December 30, 2021, 06:42:10 AM
Quote from: FullGasCZ on December 22, 2021, 07:34:49 PM
Quote from: Kamuto on December 21, 2021, 11:05:15 PM
Quote from: FullGasCZ on December 20, 2021, 09:55:20 PM
Hi, i have problem with sectric on Mini Mpi, it is stock VR sensor and ecu dont accept this signal. It should be that voltage on the peak is too low? Or shape of curve is incorrect? The sensor is in the groove in the lobe of camshaft.
Thank You for answer
maybe your ecu is configured with hall trigger hw for secondary trigger?
No, ecu is configured correct. Or can i verify it somehow?
photo: https://ibb.co/M7WDYy2
on your paper it writes sec trigger hall, and you are using VR sensor for that, so that's your answer..
Really? i see Sec trig VR, where is the problem?
you are right.. my bad