Author Topic: Vr6 12v mk4 camshaft sensor settings  (Read 1129 times)

Offline nevaeh speed

  • Jr. Member
  • **
  • Posts: 9
  • BHP: 0
Vr6 12v mk4 camshaft sensor settings
« on: May 08, 2021, 02:32:04 am »
Trying to get a car running full sequential ignition, and it's running a multi window camshaft window froma 1999.5-2001 mk4 vr6. Tried doing cam sync but still no fire. Window is similar to 24v vr6 windows 2002-2005.
 


« Last Edit: May 08, 2021, 02:48:51 am by nevaeh speed »

Offline 299vr6-t

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
Re: Vr6 12v mk4 camshaft sensor settings
« Reply #1 on: June 13, 2021, 01:12:49 pm »
You need these sec.trigger settings:

mode: CAM SYNC
Edge: Rinsing

Ignore Sectrig Pulses above: 15
Max. primary edge between sec. triggers: 30