Author Topic: Injector Upgrade tunning issues  (Read 4114 times)

Offline Smee

  • Jr. Member
  • **
  • Posts: 6
  • BHP: 0
Injector Upgrade tunning issues
« on: November 02, 2017, 04:10:19 am »
Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Injector Upgrade tunning issues
« Reply #1 on: November 02, 2017, 05:55:34 pm »
Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing
so what's wrong here?
Vems installer in Lithuania
[email protected]

Offline Smee

  • Jr. Member
  • **
  • Posts: 6
  • BHP: 0
Re: Injector Upgrade tunning issues
« Reply #2 on: November 03, 2017, 02:04:09 pm »
Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing
so what's wrong here?

For whatever reason, it goes real rich at throttle tip in, so essentially of I blip the throttle on down shifts (sqs trans) it goes to 10 afr and then it settles where it is supposed to.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Injector Upgrade tunning issues
« Reply #3 on: November 03, 2017, 09:48:30 pm »
Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing
so what's wrong here?

For whatever reason, it goes real rich at throttle tip in, so essentially of I blip the throttle on down shifts (sqs trans) it goes to 10 afr and then it settles where it is supposed to.
so maybe it needs some tuning?
Vems installer in Lithuania
[email protected]

Offline utkuselamoglu

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 0
Re: Injector Upgrade tunning issues
« Reply #4 on: December 11, 2017, 09:00:47 am »
I can help you,  post your latest configuration
utku selamoglu