Author Topic: Fan control v3  (Read 2332 times)

Offline james

  • Jr. Member
  • **
  • Posts: 18
  • BHP: 0
Fan control v3
« on: April 24, 2018, 06:08:47 pm »
HEllo all I'm after some advice please

I've wired up electric fan Control through p259 channel 7 pin 30
I can get it to work on the test outputs

But when I adjust the enable temperature to test it's function the fan kicks in and out for a second at a time continously 

Any ideas?

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Fan control v3
« Reply #1 on: April 26, 2018, 02:56:03 am »
HEllo all I'm after some advice please

I've wired up electric fan Control through p259 channel 7 pin 30
I can get it to work on the test outputs

But when I adjust the enable temperature to test it's function the fan kicks in and out for a second at a time continously 

Any ideas?
maybe there is some channel conflict
Vems installer in Lithuania
[email protected]